Yuku free message boards

Hey Nerf, I've been doing a little jiada 1/43 F1 Car experimenting. My two goals where to keep the guide blade down to keep as much in the slot as possible. goal number two attach a solid axle to a jiada F1 using the original wheels. I found both answers in one place. A Jiada 1/32 controller. There is a wealth of useful items inside a controller. I took the spring from the trigger and stretched it and cut it down alot. fittted it over the guide post and had a instant springing loaded guide that kept the blade down. It took several adjustments to get it right but it worked. Now the big one using the original wheels. Inside a Jiada 1/32 controller are two post. The post had holes in them that fit a 1/43 axle snuggly. Cut those out Attached the post to the wheel using a small screw. then attached it to the axle. Other useful items in a controller: Enough wire to use as motor to guide wire. and use to add brakes to a controller and track, screws, copper to use to add brakes to another controller. I'm sure there are other usful things in there I just haven't thought of how to use them. I'll do a step by step guide soon with pictures of the entire F1 jiada upgrade.