Yuku free message boards

I remember that car and the unusual numerals. Do you have a decal source for those?

Looks like an easy one to mask, so this is a chance to really get it razor sharp. I don't know you, but just in case, here's a tip or two that people ask for on HRW from time to time, and for that project, its important. Hope its helpful.

Use a good masking material, like Tamiya yellow tapes (sometimes called frogtape for some reason), and burnish the hell out of the edges with a small spoon or a burnisher just before painting, and just before stripping the tape off, lightly drag a new razor along the edge. Don't let the paint "gas out" or cure before stripping the tape. When you strip the tape, pull it back at an angle so steep it is almost peeling back on itself as you go. This helps the tape edge cut through the fresh uncured paint. After curing, very lightly polish the whole thing, but especially the masked edges, with a fine, finish, or ultra fine model polish. You will like the result. Good luck!